CLIP'N'SHADE external roller blind for windows

Product description

• Effective heat protection: over 90% of the sun's heat radiation is kept outside the window
• Easy installation without drilling and without your own tools!
• Delivery from Germany in 1-3 working days
• Free return, due to standard dimensions
• Quick and easy configuration: Start here

The CLIP'N'SHADE external roller blind is a clip-on roller blind that effectively protects the home from heat. It is simply clipped into the window using five clips - installation takes just a few minutes and can be carried out by anyone. No scaffolding is required for installation as it is done from the inside. Of course, there is also no need to drill or screw into the window or façade. As it is attached to the outside of the window, the special heat protection fabric reflects the sun's heat rays before they enter the home. The heat input is thus reduced by over 90 % - and it stays cool in the home!

Note on motor operation:
Our motorised control unit is a battery-powered radio motor. This is only charged once a year. The external roller blind therefore requires no drilling or screwing and no fixed power cable needs to be laid. You can find more information directly with the product Motor operation.

Would you like a special colour that perfectly matches your home? No problem! We can coat your external roller blind against heat in all RAL colours for €129!

Assembly video

The following link will take you to the installation video on YouTube: https://www.youtube.com/watch?v=2ksf3sImhuk

How to choose the right width

IMPORTANT: As this is a External roller blind the measurements are taken from the outside. Measure the Clear widthand the Frame width left and right. Now select the width so that the roller blind width fits into the reveal (= add up all widths). If the roller blind width is smaller than the clear width, there will be a light gap. This is purely a visual restriction and the roller blind can still be installed without any problems! If this is a problem, you can here a customised product can be ordered.

If the window is wider than 150cm, two external roller blinds can be fitted next to each other. See picture below. This is particularly the case with double-sash windows.

Do you have any questions? Then please contact our customer service! Send us an e-mail to office@clipnshade.de or contact us via our form. You can find it here.

HOW DO I CHOOSE THE RIGHT HEIGHT?

1. All our roller blinds are very flexible in terms of height, so you only need to select the correct range (e.g. 91-140 cm). You can then adjust the exact height during installation using the telescopic guide rails.
2. Measure the clear window height of your (open!) window as shown in the picture. IMPORTANT: The window frame must be at least 1.5 cm visible at the top!
3. Select the appropriate area in the drop-down menu.

Our standard widths don't fit?
Then take a look at our CLIP'N'SHADE Customised products over. Our external roller blinds for windows and balcony doors are also available here, tailored to your window with millimetre precision.

• 

  CLIP'N'SHADE - Customised external roller blind for balcony doors

  From 394.00 €

• 

  CLIP'N'SHADE - Customised external roller blind for windows

  From 285.00 €

Which colour should I choose?

We recommend choosing the colour of the external roller blind to match your windows as far as possible. For white windows (70% in Germany), white roller blinds - for grey windows or wooden windows, grey roller blinds.

WILL THE CLIP'N'SHADE EXTERNAL ROLLER BLIND FIT MY WINDOW?

Our external roller blind fits 90% of all windows - however, there are a few exceptions that you should check before ordering:

1. It must be possible to open your window. If it is a Fixed glazingour external roller blind cannot be fitted.
2. Window with Top or bottom light. Top or bottom lights are additional window units above or below your main window. It is often still possible to install our external roller blind. Contact us us before you place your order.
3. Stick rolloverThe mullion overlap is the outermost elevation of your window frame profile. For PVC-U windows, this is usually approx. 1.5-2.5 cm. Important: If there is a rubber seal, please measure it as well. Is your mullion overlap larger than 2.5 cm please contact us via the Contact form. You can find a picture of how to measure the stick overlap here:
   
4. Wooden window with rain railA rain rail is a thin metal profile on your window frame. It replaces the hanger and is designed to prevent water from entering the window. A CLIP'N'SHADE can often be fitted anyway - please contact us in any case via the Contact form. You can find a picture of a rain rail here:
   
5. Wooden window with weatherboardingA weather bar is a projecting profile on the window sash that is designed to prevent water from entering the window. Actually a great thing, but it hinders the installation of our roller blind. If the weather bar protrudes beyond the profile of the window frame, our CLIP'N'SHADE external roller blind can unfortunately not be fitted. You can find a picture of a weather bar here:
   

EXCHANGE AND CANCELLATION

As this product is a standard size, you have two weeks from receipt of the product to test it. Within this time, you can return it to us at any time free of charge and we will refund you the full price. Please just send us a short e-mail to office@clipnshade.de stating the reason for the return and your order number. Thank you very much!